Using The Child Safety Feature; Setting The Display To Stand-By Mode - Atag OX3211C Bedienungsanleitung

how to use your oven

using the child safety feature

how to use your oven

setting the display to stand-by mode

GB 12
In order to prevent your oven being turned on unintentionally, you may
lock the controls.
To do this:
- Press on the START/STOP touch control until it bleeps.
Keep pressing on the touch control until the bleep stops and a key
appears
(key)
-To unlock the controls, repeat the operation.
-Press the START/STOP touch control until you hear a long bleep.
Keep your finger on the touch control until the bleep stops and
the
NOTE: Only the "separate timer" program remains operational.
To reduce your oven's power consumption to a minimum when it is not
in use, you can put your readout system in STANDBY MODE.
To carry out this operation, proceed as follows:
GOING INTO STANDBY MODE:
- Your oven must be in normal time readout mode.
- Press both the + and - controls for five seconds at the
same time.
- The display reads "Lcd off".
- Take your fingers off the two controls.
- 30 seconds later your readout will switch off.
Your oven is now in standby mode; whenever you are in the normal time
readout mode, it will turn off automatically after 30
seconds.
COMING OUT OF STANDBY MODE:
- Your oven must be in the normal time readout mode.
- Press the + and - controls for five seconds at the
same time.
- The display will then read "Lcd on".
- Take your fingers off the two controls.
- You are now out of the STANDBY MODE; the readout is now perma-
nently lit.
on the indicator panel.
key disappears from the display panel.