Delayed Cooking; Delaying The Cooking; Using The Timer - Atag OX6192E Bedienungsanleitung

how to use your oven?

delayed cooking

SET
SET
how to use your oven?

using the timer

SET
GB 52
Proceed as for a programmed cooking, then after entering the cooking time:
- Press the SET touch control until the end cooking icon begins flas-
hing .
The display flashes à 0:00 to indicate that you can now adjust the setting.
+
- Press the or
example: 13:00.
Now you can set the cooking time for up to 23:59 hours.
After these steps, the oven heating is delayed so that cooking ends at
13:00.
At the end of cooking (end of programmed time):
- the oven turns off;
- the cooking time indicator turns off;
- 0:00 is displayed;
- a series of beeps sounds for a few minutes.
The beeps can be stopped by pushing on any touch control, and the display
then returns to the time of day.
In the case of programmed cooking, the oven space is lit until cooking
begins and once cooking is finished.
If you are using a cooking program with fan-circulated air, unless you
return the function selector to 0, the fan will continue to operate to make
the temperature in the oven uniform.
Your oven is equipped with an electronic timer that is independ-
ent of the oven functions, making it possible to countdown a set
time.
In this case, the timer display has priority over the clock display.
Press the SET touch control; the display will flash and the timer
icon will appear and also flash.
+
-
Press the or
displayed (60 minutes maximum).
The display stops flashing after a few seconds and the timer starts working,
counting down the time in seconds. Once the time has expired, the timer
emits a series of beeps to notify you.
NOTE: You can at all times change or cancel the timer programming.
-
touch controls.
touch control until the desired length of time is