Atag OX3211C Bedienungsanleitung Seite 72

installer's information
housing
GB 18
534
558
22
595
The oven can be installed under a work top or in a column of cabinetry
(open* or closed) having the appropriate dimensions for built-in instal-
lation (see adjacent diagram).
Your oven has optimised air circulation that allows it to achieve remarkable
cooking and cleaning results if the following guidelines are followed:
• Centre the oven in the cabinet so as to guarantee a minimum distance of 5
mm between the appliance and the cabinet beside it.
• The material or coating of the cabinet must be heat-resistant.
• For greater stability, attach the oven in the cabinet with two screws through
the holes provided for this purpose on either side of the front inner panel.
To do this:
1) Remove the rubber screw covers to access the mounting holes.
2) Drill a hole in the cabinet panel to avoid splitting the wood.
3) Attach the oven with the 2 screws.
4) Replace the rubber screw covers (they also absorb the shock caused by
closing the oven door).
(*) if the cabinet is open, its opening must be 70 mm (maximum).
20
560
50
400
550
560