Cooling Mode; Heating Mode - be cool BC12SK2001 Installationshandbuch

OPERATING INSTRUCTIONS

COOLING MODE

The cooling function allows the air condit-
ioner to cool the room and at the same time
reduces Air humidity.
To activate the cooling function , press the
MODE button until the symbol
appears on the display.
The cooling function is activated by setting the button
or at a temperature lower than that of the room.
To optimize the function of the Air conditioner, adjust
the temperature (1) , the speed (2) and the direction
of the air flow (3) by pressing the button indicated.

HEATING MODE

The heating function allows the air conditi-
oner to heat the room.
To activate the heating function, press the
MODE button until the symbol
appears on the display.
With the button or
that of the room..
To optimize the function of the Air conditioner adjust
the temperature ( 1 ), the speed ( 2 ) and the direction
of the air flow ( 3 ) by pressing the button indicated
If the appliance is fitted with a electrical heater,
which delays appliance to startup in a few seconds
to ensure an immediate output of hot air (Optional ,
depends on the model).
In HEATING operation, the appliance can automatically
activate a defrost cycle, which is essential to clean the
frost on the condenser so as to recover its heat exchange
function.This procedure usually lasts for 2-10 minutes
during defrosting,indoor unit fan stop operation.
After defrosting ,it resumes to HEATING mode
automatically.
set a temperature higher than
MODE
FAN
SWING
HEALTH
13
ECO
TIMER
SLEEP
DISPLAY
SWING
TURBO
MODE ECO
TIMER
FAN SLEEP
DISPLAY
SWING
SWING
HEALTH TURBO