HELIX P ONE Bedienungsanleitung Seite 20

Examples for speaker configurations
In series
Two subwoofers with one voice coil (single voice coil) or one
subwoofer with dual voice coil are connected in series.
Note: The connection of two voice coils in series will result in
doubling the impedance!
RMS output power ≤ 1% THD+N:
Two subwoofers with 1 x 2 Ohms correspond to a total
impedance of 4 Ohms: 500 Watts
Two subwoofers with
a single voice coil
One Subwoofer with 2 x 2 Ohms also corresponds to a total
impedance of 4 Ohms: 500 Watts
Two subwoofers with 1 x 1 Ohm correspond to a total
impedance of 2 Ohms: 880 / 1,760 Watts
One subwoofer with 2 x 1 Ohm also correspond to a total
impedance of 2 Ohms: 880 Watts
Note: The negative terminal of the first voice coil has to be con-
nected to the positive terminal of the second voice coil by using
One subwoofer with
a speaker wire with the same gauge as the other speaker.
a dual voice coil
20