Programming
Manual mode
In manual mode, only the time of day and the symbol
lights up. The cooking time must be monitored by yourself.
Note
• To ensure that the oven was not accidentally left on, after 5
hours, the display will first flash to warn you that the stove
will switch to standby mode. After 10 hours, the oven will
automatically switch to standby mode.
• If the display is flashing, press either any key to continue
the baking process, or simultaneously
than 3 seconds to put the device in the standby mode.
Minute minder
This function can be used to obtain an acoustic warning in
the completion of the set time period.
• Press the button
to select the timer function.
• Use the
and
buttons to set the timer.
• Press the key
to confirm the entry. Then the icon will
light up continuously - the timer is set.
• When the time expires, the device will emit a beep, while
the symbol
flashes.
• To stop the alarm, press any button for less than 3 seconds.
The icon
on the display will also disappear.
Note that the timer has no influence on the
cooking process, but serves only as a warning /
reminder.
36
Semi-automatic cooking (duration)
This function is used in a desired time interval to bake / cook.
To do this, give the food into the oven and set the knobs a
heating function and thermostatic heat. The maximum time
of 10 hours.
• Press the button
• Use the
back.
• Press the
and
for more
• Now the time of day is displayed again, as well as the icons
and
• When completed, the unit will stop and send a beep signal.
The
• Adjust the knob back to the zero position and briefly press
any key to stop the beeping.
• Pressing the
the machine to manual mode.
Semi-automatic cooking (target time)
This function is used to cook up to a fixed time. To do this,
put the food into the oven and set the knobs (heating mode
and thermostatic value)
• Press the button
• Use the
• Press the button
• Now again the time of day is displayed, as well as the
symbols
process.
• When completed, the unit will stop and send a beep signal.
The icon
• Adjust the knob back to zero position and briefly press any
key to stop the beeping.
• Pressing the button
return the machine to manual mode.
until you see „Dur" on the screen.
and
keys to set the duration of the interval
button to confirm.
. Meanwhile, the oven will start working.
icon will flash.
button for more than 3 seconds will return
until you see „End" on the screen.
and
keys to set the finish time.
to confirm.
and
. Meanwhile, the oven will start the
will flash.
for more than 3 seconds will