Swim & Fun 1401 Handbuch Seite 137

UK
10
11
Restart
12
to cool in
13
standby
14 status
15
16
17
Parameter checking
Select the parameter menu A and press the settings button B to enter the menu. Press C or D but-
ton to check codes between d0 and d11
Usage parameters d0 to d11
Code Condition
d0 IPM temperature
d1 Water temperature (inlet)
d2 Water temperature (outlet)
d3 Ambient temperature
d4 Frequency limitation code
d5 Pipe temperature
d6 Exhaust gas temperature
d7 Step of EEV
d8 Compressor working frequency
d9 Compressor current
d10 Fan Speed
d11 Error code for the last time
Remark: d4 Frequency limitation code, 0: No frequency limit; 1: Coil pipe temperature limit; 2: Overheating or overcooling
frequency limit; 4: Drive Current frequency limit; 8: Drive voltage frequency limit; 16:Drive high temperature frequency limit
MV-1401-1402-1403-01-2020 . © All rights reserved Swim & Fun Scandinavia ApS
T1≥Tset
Tset >T1≥Tset-1
"Smart mode"
Tset-1 >T1≥Tset-2 27°C >T1 ≥ 26°C Frequency: F2 -F3-F4,...,-F9
<Tset-2
≥Tset
"Silent mode"
Tset>T1≥Tset-1
T1<Tset-1
"Powerful mode"
T1<Tset-1
A
T1 ≥ 28°C
28°C > T1 ≥ 27°C Silent mode - frequency F2
<26°C
≥28°C
28°C > T1 ≥ 27°C Smart mode - frequency F5
T1 < 27°C
T1 < 27°C
B C D
Scope
0-120 °C
-9 °C ~ 99 °C
-9 °C ~ 99 °C
-30 °C ~ 70°C
0, 1, 2, 4, 8, 16
-30 °C ~ 70 °C
0 °C ~ C5 °C (125 °C)
0~99
0~99Hz
0~30A
0-1200 (rpm)
All error codes
Standby
Powerful mode - frequency F9
Silent mode - frequency F2/F1
Powerful mode - frequency F10/F9
Standby
Remark
Real testing value
Real testing value
Real testing value
Flash if Real test value <-9
Real testing value
Flash if Real test value <-9
Real testing value
N*5
Real testing value
Real testing value
Real testing value
137