Automatic Language Detection - Optelec ClearReader+ Basic Bedienungsanleitung

+
Optelec ClearReader Basic

Automatic language detection

When the "Automatic language detection" is enabled,
+
the ClearReader Basic will detect the language of the
text reading zone or paragraph, and automatically
+
select the correct reading voice. The ClearReader
Basic is capable of detecting multiple languages in
one page. To enable the language detection, first
enable up to maximum five languages. To do this, go
to the "Voice" selection menu, and enable a language
by selecting at least one voice per language. Do this
for a maximum of 5 languages. Now make sure the
language detection is enabled in the "Options" menu.
+
Note: In case the ClearReader Basic is not able to detect the language, the langage of the menu
+
is being used. If English is one of the selected languages, the ClearReader Basic will use an
English voice and will ignore the menu language.
English 52