Turning On The Clearreader Basic; Standby Mode; Turning Off The Clearreader Basic - Optelec ClearReader+ Basic Bedienungsanleitung

Optelec
Turning on the ClearReader
To turn on the ClearReader
hand side. The start-up process will take approximately 40 seconds. You will
hear a series of beeps to indicate that the ClearReader
followed by the start-up sound. Now the Power indicator is lit up and the
+
ClearReader Basic is ready to use.

Standby mode

+
The ClearReader Basic will go into standby mode by pressing, and holding down the Back button
and Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
blinking and the ClearReader
Basic from standby, press the Power button. After 40 hours the ClearReade
down. If switching-on the ClearReader
take approximately 5 seconds.
Turning off the ClearReader
Press the Power button to power down the ClearReader
sound will be played and the Power indicator will turn off.
27
+
Basic
+
Basic, press the round Power button on the right-
+
Basic will go into standby mode. To wake up the ClearReader
+
Basic from the standby mode, the start-up process will
+
Basic
+
Basic is starting up
+
Basic completely. The power down
+
ClearReader Basic
+
r+
Basic will power
English