Selecting The Reading Voice Or Language - Optelec ClearReader+ Basic Bedienungsanleitung

+
Optelec ClearReader Basic

Selecting the reading voice or language

To select your preferred reading voice or reading language, press and hold the Back button while
+
turning the Speed dial at the same time. The ClearReader Basic will switch to the next voice and
announce the name of the newly selected voice and the language. For optimal performance the
reading language and language of the document need to match. If the language of the document
does not match the selected reading language, the text recognition will be of a lower quality and
the recognition will take longer.
Note: In case automatic language detection is enabled, this button only changes between voices
of the detected language. For instance, if the detected language is English this button will only
change between the different English voices. With automatic language detection enabled, you will
not be able to change the language of the menu. To change the menu language, either: 1) disable
automatic language detection, or 2) scan a document in your preferred menu language and
change the voice once in the menu.
English 30