Mixcder HD401 Handbuch Seite 4

and red alternately, which means your headphone is in "pairing
mode" waiting to be paired with your device. The voice
prompts "Ready to pair, turn on Wireless, pin code is 0000."
6. As soon as the computer system detects the new device
and select "Mixcder HD401". Once successfully paired, the
LED turns to solid blue. You will hear "connected".
5-2 Pairing the headphone with a phone
1. Make sure the headphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
the power button until you see the LED indicator flashes blue
and red alternately,which means your headphone is in "pairing
mode"waiting to be paired with your device. The voice prompts
"Ready to pair, turn on Wireless, pin code is 0000."
4. Start Wireless function on your phone and search for new
devices.
5. Select the "Mixcder HD401" to pair. Once successfully
paired, the LED turns to solid blue. You will hear "connected".
5-3 Connecting to paired devices
Mixcder HD401 will pair with the last paired device automati-
cally when turning on. But for some computers or laptops you
will need to manually pair every time.
Note: There will be a prompt voice"Ready to pair, turn on
Wireless, pin code is 0000" when first pairing.
6. Making and Answering a Call
6-1 Making a call
1. Make sure the headphone is pairing to the mobile phone.
Dial through the mobile phone and press the call button on the
phone.
2. To end a call, press the power button once again or also end
the call directly by the phone.
6-2 Answering a call
Make sure the Headphone is pairing with your phone. Please
EN-3