Technical Data - Balance KH 2113 Bedienungsanleitung

Attention!
First pack and transport the Professional Hair
Dryer when it has completely cooled down.
Otherwise, it could damage other items.
Cleaning
Danger of electrical shock
Before cleaning the Professional Hair Dryer,
always remove the plug from the mains wall
socket.
Cleaning the housing
To clean the housing, use a soft cloth moistened
with a mild soapy solution.
Cleaning the air suction grill and the
filter element
Fire hazard!
Clean the air suction grill
w
ment at regular intervals with a soft brush.
Fold out the air suction grill
Clean the filter element
the air suction grill e
Replace the filter element
e
suction grill .
Danger of electrical shock
Before using the Professional Hair Dryer again
after cleaning, it must be completely dry.
e
and the filter ele-
e
to the rear.
w and the openings of
with a soft brush.
w
and close the air
Troubleshooting
Should your Professional Hair Dryer not function as
expected, first remove the plug from the wall socket
and allow the appliance to cool down for a few minu-
tes. The appliance is fitted with an overheating protec-
tor! Should the appliance still not function when
cooled down, consult the service.

Technical data

Mains voltage:
Rated output:
Protection class:
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.
- 12 -
230-240V ~ 50Hz
2000 W
II/