Delivery Contents; Description Of The Appliance; Drying And Styling Hair - Balance KH 2113 Bedienungsanleitung

Intended Use
The Professional Hair Dryer is intended only for the
drying and shaping of human hair, under no circum-
stances is it to be used for wigs and hairpieces
made of synthetic material. You may use it exclusively
in domestic households. Pay heed to all of the infor-
mation in this operating manual, especially the safety
instructions.

Delivery Contents

• Professional Hair Dryer KH 2113
• Styling Jet
• Finger Diffusor
• Operating manual

Description of the appliance

q Styling Jet
w
Filter element
e
Air suction grill
r
Suspension lug
t
Blower level switch (2 levels)
y Heat level switch (3 levels)
u Cool level switch ("Cool-Shot")
i
Finger Diffusor
Operation
Insert the plug into the wall socket.
Switch the Professional Hair Dryer on with the
blower level switch
The Professional Hair Dryer is fitted with two
function switches. With these you can separately
select the strength of the air flow (Blower switch
and the amount of heat (Heat level switch
t
.
y
):
Blower levels
0 The Professional Hair Dryer is
switched off
1 reduced air flow
2 full power air flow
Heat levels
1 Cold air flow
2 Low heating level
3 High heating level
With the cool level switch "Cool-Shot"
produce a cooler air flow with every combination of
blower and heat levels.
Switch the appliance off after use, in that you
place the blower switch
Then remove the plug from the wall socket.

Drying and styling hair

To quickly dry hair, we recommend first of all
using a high blower and heater setting for a
short period. Afterwards, place the settings at a
lower level to shape and form the hair.
With the enclosed styling jet
turned into all positions, you can use the air flow di-
rectly for styling.
If you wish to dry your hair particulary
gently, or for the so-called "air-dryed permanent
wave", use the finger diffusor
For this, first of all remove the styling jet
replace it with the finger diffusor.
Before you comb your hair out allow it to cool,
so that the styling retains its form.
For cooling the hair you can use the switch
t
) "Cool-Shot"
y
settings.
- 11 -
t
into position "0".
q , which can be
i
.
u
or level 1 of the blower switch
u
you can
q
, then