Technical Data - Balance KH1803 Bedienungsanleitung

Cleaning
Danger of electrical shock
ALWAYS remove the plug from the power socket
before cleaning the hair dryer.
Cleaning the housing
To clean the housing, use a soft cloth moistened
with a mild soapy solution.
Cleaning the air suction grill
Risk of Fire!
Clean the air suction grill
with a soft brush.
Press the air suction grill
and below, so that you can release it from the
hair dryer.
Clean the openings of the air suction grill
with a soft brush.
Insert the upper securing lug of the air suction
w
grill into the guide on the hair dryer. Then
press the lower securing lug into the hair dryer
until the air suction grill
Danger of an electrical shock!
After being cleaned, the hair dryer must be com-
pletely dry before using it again.
Troubleshooting
Should your hair dryer not function as expected,
first remove the plug from the wall socket and allow
the appliance to cool down for a few minutes.
The appliance is fitted with an overheating protector!
Should the appliance still not function, consult the
service department detailed on the Warranty card.
w
at regular intervals
w
together, from above
w
w
audibly engages.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally responsible manner.

Technical data

Mains voltage: 220-240 V ~ 50 Hz
Nominal power: 2200 W
Protection class: II /
- 4 -