License Release; Switching Off The Device - Hella Gutmann mega macs 77 Schnellstartanleitung

Putting Into Operation

License Release

5.4 License Release
NOTE
In order to use the full scope of the purchased licenses you need to connect the device to the HGS
server prior to the first start-up.
Proceed as follows to connect the device with the HGS server:
1. Select Contracts under > Settings in the main menu.
2. Select the >License< tab.
3. Retrieve My licences with
Data is downloaded. Purchased licences are displayed.
4. Switch the device off and on again.
Now you can start working with the device.
5.5

Switching Off the Device

NOTE
Under normal conditions it is sufficient to switch off the device with
the device must be switched off with the main switch so that it cannot be switched on
unintentionally by external influences.
Proceed as follows to switch off the device:
1. Switch off the device with
2. Observe the confirmation prompt.
3. Switch off the device with
After switching off, the device is in standby mode.
.
.
. Abort the procedure with
. For transport and storage
.
mega macs 77
EN
43