Configuring The Device; Configuring The Interfaces; Configuring The Ethernet; Configuring Wlan - Hella Gutmann mega macs 77 Schnellstartanleitung

mega macs 77

6 Configuring the Device

Configure all interfaces and functions under >Settings< in the main menu.
EN
6.1

Configuring the Interfaces

Set the interfaces for the printer, BPC-Tool, Ethernet (connection only through docking station) and WLAN here.
Configure all interfaces of the device under Settings > Interfaces.
If there are several possible connections to devices or tools, the fastest and most stable connection is always
preferred.
The hierarchy for connection is as follows:
1. USB
2. Ethernet
3. WLAN

6.1.1 Configuring the Ethernet

Make your network settings here.
Proceed as follows to connect the device to a network (router) via Ethernet interface of the docking station:
1. Insert the Ethernet cable (not included in the delivery contents) into the Ethernet port of the device and the remote
station.
2. Select Interfaces under > Settings in the main menu.
3. Select the >Ethernet< tab.
4. Open a list under IP address mode with
If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs 77 automatically. This option is set ex works.
If >Determine manually< is selected, then enter a free network IP address, e.g. 192.168.255.255. under
mega macs IP address.
5. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
The selection will be saved automatically.

6.1.2 Configuring WLAN

Make your WLAN settings here.
WLAN stands for Wireless Local Area Network. Data is transmitted wirelessly via a router and DSL modem (access
point). The various devices log in to the WLAN router.
6.1.2.1

Searching for and installing a WLAN interface

Proceed as follows to connect the device to a network (router) through WLAN:
1. Select Interfaces under > Settings in the main menu.
2. Select the >WLAN< tab.
3. Activate the check box to take settings.
A confirmation prompt appears if Ethernet was previously activated in the device.
44
.
Configuring the Device
Configuring the Interfaces