Hella Gutmann mega macs 77 Schnellstartanleitung Seite 45

Configuring the Device
Configuring the Interfaces
4. Observe the confirmation prompt.
5. Confirm the confirmation prompt with
6. Open a list under IP address mode with
If >Determine automatically (DHCP)< (recommended) is set, the DHCP server of the network will assign an IP
address to the mega macs 77 automatically. This option is set ex works.
If >Determine manually< is selected, then enter a free network IP address, e.g. 192.168.255.255. under
mega macs IP address.
7. Select >Determine automatically (DHCP)< (recommended) or >Determine manually<.
The selection will be saved automatically.
8. Create wireless network with
The device searches for wireless networks.
Once the device has successfully finished searching for wireless networks, a pick list of wireless networks found is
displayed.
9. Select the required wireless network.
10. Regard the window with information and instructions.
11. Confirm the info and instructions window with
12. Enter the WLAN password.
13. Confirm the password with
The input is saved automatically.
The following message appears if the connection to the network has been set up successfully:
• the name of the selected wireless network under Wireless network (SSID)
• the security system of the selected wireless network under WLAN security
• the IP address of the installed Hella Gutmann Driver under Gutmann Portal IP address
14. Click the symbol on the right of the header to check the connection status.
The device is connected to the Internet if Data server is displayed under Connection and connected under WLAN.
You can use the WLAN connection now.
.
.
.
.
.
mega macs 77
EN
45