Wireless Receiver Setup; Connect The Adapters - Bose Surround 500 Sicherheitshinweise Und Gebrauchsanleitungen

CONNECT THE ADAPTERS

1. Using the screwdriver, turn the screws to the left (counter-clockwise) to loosen the
wire terminals.
2. Insert the red, stripped end of the two-pin cable marked H into the red H terminal.
3. Insert the black, stripped end of the two-pin cable into the silver z terminal.
NOTE: Be sure to only insert the stripped and tinned portions of each exposed
wire to avoid clamping the wire's insulation.
4. Using the screwdriver, turn the screws to the right (clockwise) to secure the wires
into the terminals.
5. Repeat steps 1 – 4 to connect the other adapter.
W IRELESS R E CE I V E R S ET U P
1 1
|
E N G