Introduction; 1�1 Symbols Used - Renfert PROMIX one Bedienungsanleitung

1

Introduction

1.1 Symbols used
In the instructions for use and on the equipment itself, you will find these symbols with the following
meanings:
Danger
Immediate risk of injury. Consult accompanying documents!
Electrical current
This indicates a risk of injury due to electrical current.
Caution
Risk of damage to the equipment if the instruction is not followed.
Notice
A general notice that improves and eases use.
The equipment complies with applicable EU directives.
Not for permanent operation!
After two mixing processes in succession, ensure that there is a pause of 7 minutes.
Protection class II
Within the EU, this equipment is subject to the provisions of the directive 2002/96/EC
(WEEE Directive).
Only to be used by specialist staff.
Read the operating instructions!
Manufacturer
Date of manufacture
Permitted temperature range for transport and storage temperature. Refer to Chapter 2.4.
Permitted humidity range for transport and storage temperature. Refer to Chapter 2.4.
Permitted air pressure range for transport and storage temperature. Refer to Chapter 2.4.
► List, particular attention should be paid
• List
- Subordinate list
⇒ Instructions / appropriate action / input / operational sequence:
You will be asked to carry out the action in a specified order.
♦ Result of an action / reaction of the equipment / reaction of the program:
The equipment or program reacts as a result of your actions or when a specific incident occurs.
Other symbols are explained as they occur�
- 3 -
EN