Identification; Nameplate; Maintaining The Product - Grundfos SB Funktionsprofil Und Benutzerhandbuch

6.4 Identification

6.4.1 Nameplate

1 2
Type SBA3-35 A
15
Model 97896286 P61404
14
1x220-240V~ 50Hz
13
Q 100 l/m H 35m T
max max
12 Insulation Class F
Made in Italy IP68
16 11 10
Fig. 7 Example of nameplate
Pos. Description
1 Product type
2 Frequency [Hz]
Production code. The last four digits
3
indicate the year and week of manufacture.
4 Power input [W]
5 Serial number
6 Full-load current [A]
7 Maximum installation depth [m]
8 Maximum liquid temperature [°C]
9 Motor insulation class
10 Enclosure class
11 Maximum head [m]
12 Approval marks
13 Maximum flow rate [l/min.]
14 Supply voltage [V]
15 Product number
16 Country of origin
10
3 4 5
SN000001
6
P 800 W I 3,8A
1 1/1
7
40°C 10m
max
8
9
DK - 8850 Bjerringbro, Denmark

7. Maintaining the product

DANGER
Electric shock
Death or serious personal injury
- If the power supply cable is damaged, it
must be replaced by the manufacturer,
his service agent or similarly qualified
persons in order to avoid hazard.
Clean the strainer every fall with a brush and a water
jet when needed. In normal operation, the pump
does not require any specific maintenance.