Accessories; Magnetic Tape; Agnetic Ring; Cover Strip - Balluff BML SF2-I2-GZZZ-KA Serie Betriebsanleitung

BML SF2-I2 _ _ -GZZZ - ZZZ5-...
Incremental Magnetic Encoder System
8

Accessories

Accessories are not included in the scope of delivery and
must be ordered separately.
8.1

Magnetic tape

8.1.1 Magnetic tape
All magnetic tapes listed here as examples are designed to
be used with an optional adhesive tape for attachment and
can be protected with a cover strip (see section 8.1.3 on
page 23).
When selecting the magnetic tape, make sure
that the magnetic tape and sensor head are
compatible. This particularly applies to the
following:
– Pole width
– For reference points (none, one, two or more
(fixed-periodic)), see section 3.4.2 and
section 3.4.3 on page 9.
Magnetic tape with incremental track, no reference
points
(for sensor head without reference point function or with
pole-periodic reference point function)
A complete technical description and installation
instructions for magnetic tapes can be found in
the document titled User's Guide – Magnetic
Tape.
Width
Height
BML TSC-_ _ _ _- 0...
(without adhesive tape attachment)
BML TSC-_ _ _ _- 1...
(with adhesive tape attachment)
Length
BML TSC- I28 _- _ _ _ _ - Mxxxx
BML TSC- I2A _- _ _ _ _ - Mxxxx
BML TSC- I2D _- _ _ _ _ - Mxxxx
Pole width
BML TSC-I2....
Accuracy class (based on 1 m)
BML TSC-I28_-...
BML TSC-I2A_-...
BML TSC-I2D_-...
Ambient temperature
Temperature coefficient typ.
External magnetic fields
to avoid permanent damage
to avoid influencing the
measurement
www.balluff.com
8.1.2
8.1.3
To protect the magnetic tape from damage caused by
chips or chemicals, you may cover it using a stainless steel
cover strip. The thickness of the cover strip, including
adhesive layer, is 0.15 mm.
The cover strip can be ordered together with the magnetic
tape (in tape length, position accessory in the magnetic
tape type code, see User's Guide – Magnetic Tape) or on a
reel in four defined lengths.
Preferred types
Order code
BML-A013-T0500
BML001J
BML-A013-T1000
BML001K
BML-A013-T2400
BML001L
BML-A013-T4800
10 mm
BML001M
Tab. 8-1:
1.35 mm
1.55 mm
7 cm...10 m
7 cm...24 m
7 cm...24 m
2 mm
8 μm
18 μm
50 μm
–20 °C...+80 °C
10.5 × 10 K
-6 -1
< 30 mT
< 1 mT

agnetic ring

A complete technical description can be found in
the document titled User's Guide - Magnetic
Rings.

Cover strip

Important!
The permissible air gap between the sensor
head and magnetic tape is reduced by the
thickness of the cover strip!
Length
5 m
10 m
24 m
48 m
Cover strips
english
Width
10 mm
23