Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety notices / Operation / Cleaning
Only use the furniture transport kit on even
surfaces.
operation
Placing furniture on
the rolling bases
Verify there is adequate space to work safely.
Remove objects such as other pieces of furni-
ture from about 1.5 m around the rolling
bases
.
4
note: to prevent unbalanced lifting, always
place the lever arm
lifted, paying attention to the load centre.
Grab the lever arm
requires the least amount of force.
Slide the flexible head
under the centre of the piece of furniture
(see Fig. A).
Slowly push down on the lever arm
the piece of furniture (see Fig. B).
Keep the lever arm
Slide a rolling base
raised corners of the piece of furniture
(see Fig. C).
To lower the piece of furniture onto the rolling
bases
, slowly raise the lever arm
4
(see Fig. D).
Remove the lever arm
Repeat these steps on the opposite side of the
furniture.
note: each rolling base
. This allows you to align the rolling bases
5
under the piece of furniture.
4
Sliding furniture
Align the rolling bases
in the same direction.
Move the piece of furniture to the desired
location using the rolling bases
6
GB
104019_pow_Moebeltransporter_content_HU_SI_CZ_SK.indd 6
under the side to be
2
by the handle
. This
2
3
of the lever arm
1
2
to raise
2
pushed down.
2
under each of the two
4
2
.
2
has a swivel base
4
so the casters point
4
.
4
Removing the rolling bases
notice:
To prevent unbalanced lifting, always place the
lever arm
under the side to be lifted, paying
2
attention to the load centre.
Centre the swivel head
under the piece of furniture.
notice:
Grab the lever arm
by the handle
2
requires the least amount of force.
Slowly push down on the lever arm
the piece of furniture.
Keep the lever arm
2
Remove the rolling bases
Slowly raise the lever arm
Remove the lever arm
Repeat these steps on the opposite side of the
furniture.
Troubleshooting
The furniture is very difficult to move.
Align the rolling bases
in the same direction.
The piece of furniture can easily tip.
Place the four rolling bases
side corners of the piece of furniture. The piece
of furniture should be all the way on the four
roller bases
.
4
Cleaning
aTTenTIon!
The lever arm
and rolling base
2
damaged.
Never clean the lever arm
rolling bases
with petrol, solvents cleaners
4
harmful to plastics.
of the lifting arm
1
2
. This
3
to raise
2
pushed down.
.
4
to lower the load
2
.
2
so the casters point
4
under the out-
4
may be
4
and the four
2
05.01.15 15:52
Werbung
Inhaltsverzeichnis
