Battery Insertion/ Exchange; Operating Elements; Handling And Operation; Switching The Appliance On/Off - Powerfix Profi PFRS 1.5 A2 Bedienungsanleitung

Battery insertion/ exchange

This wax melter requires 2 x 1.5 V batteries, type
AA/LR6/Mignon, for operation.
♦ Open the battery compartment
underside of the wax melter
♦ Place the batteries into the battery compart-
ment
depicted in it.
♦ Close and secure the battery compartment.

Operating elements

Handling and operation

In this chapter you will receive important infor-
mation for the handling and operation of the
appliance.
Switching the appliance on/off
♦ To switch the appliance on, place the On/
Off switch
♦ Press and hold the activation button
heat up the wax melter tip
will remain lit as long as you hold down the
activation button
♦ To switch the appliance off, place the On/
Off switch

Application example

Preparation (Fig. A)
♦ Clean the damaged area with the scraper
and remove all loose parts.
Colour selection (Fig. B)
♦ Select the matching colour tone. Ensure that
several colour tones, from light to dark, are
always used.
PFRS 1.5 A2
, following the polarity details as
Wax melter
Wax melter tip
On/Off switch
Activation button
Battery compartment
Red LED
Cleaning scraper
Scraper with planer function
Scraper with curvature
Sanding sponge
Cleaning cloth
Battery type AA/LR6/Mignon
at the position "ON".
at the position "OFF".
.
. The red LED
.
on the
to
│
GB 7 ■