Preparation; General Notes; Digital Connections - Yamaha dvd s510 Bedienungsanleitung

Preparation

AV receiver
Center speaker
Left main
speaker
Left rear
speaker
Karaoke vocal
14 PREPARATION
DIGITAL OUT
PCM DIGITAL
MPEG DTS
OPTICAL COAXIAL
O C
OPTICAL COAXIAL
IN IN
Subwoofer
Right main
speaker
Right rear
speaker
All

General notes

- Depending on the equipment you wish to connect, there are various ways
you could connect this DVD player. Possible connections are shown in the
following drawings.
- Please refer to the manuals of other equipment as necessary to make the
best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.

Digital Connections

Your DVD-Player has COAXIAL and OPTICAL digital out jacks. Connect
one or both of them to your AV receiver equipped with Dolby digital, DTS,
or MPEG decoder using each specific cable (separate purchase).
You will need to activate the player's digital output (see 'Personal
Preferences').
Note: If the audio format of the digital output does not match the capabilities of
your receiver, the receiver will produce a strong, distorted sound or no sound at all.
Make sure to select the appropriate audio format at menu screen included on the
disc. Pressing AUDIO once or more may change not only audio languages but also
audio formats, and the selected format appears for several seconds on the status
window.
When connecting the optical fiber cable
Remove the cover when using the OPTICAL jack. Keep the cover and
attach it when the jack is not being used to protect it from dust.
Bend an optical cable as little as possible.
Use commercially available optical fiber cable that conforms to EIA
standards. Other cables may not function correctly.