Adjusting The Reading Settings; Opening The Clearview Configuration Menu - Optelec ClearView+ Bedienungsanleitung

Optelec

4. Adjusting the reading settings

The default reading settings can be adjusted via the configuration menu or by using
the configuration pages at the end of this manual. To change the reading settings
place a text document on the reading table of the ClearView
settings using the menu the adjustments will be immediately visible on the screen.
For information on how to use the configuration pages, please refer to chapter 5.
Opening the ClearView
To open the ClearView
Zero Button Feature Pack:
1.
Lift up the left part of the
Zero Button wrist pad
until you hear a click
English
+
configuration menu
+
configuration menu please remove the left wrist pad of the
2.
Pull the left wrist pad
towards you
+
ClearView Zero Button
+
. While configuring the
3.
Remove the left wrist pad
Page 7