Machine Modification Hazard; Additional Safety Instructions - Chicago Pneumatic CP 4123 Serie Sicherheitsvorschriften Und Bedienungsanleitung

CP 4123, CP 4125
When the percussion mechanism is activated,

the only body contact with the machine you
should have is your hands on the handles. Avoid
any other contact, e.g. supporting any part of
the body against the machine or leaning onto
the machine trying to increase the feed force.
It is also important not to keep the trigger
engaged while extracting the tool from the
broken work surface.
Make sure that the inserted tool is well-

maintained (including sharpness, if a cutting
tool), not worn out, and of the proper size.
Inserted tools that are not well-maintained, or
that are worn out, or that are not of the proper
size result in longer time to complete a task
(and a longer period of exposure to vibration)
and may result in or contribute to higher levels
of vibration exposure.
Stop working Immediately if the machine

suddenly starts to vibrate strongly. Before
resuming the work, find and remove the cause
of the increased vibrations.
Comply with the recommended air-pressure

when operating the machine. Either higher or
lower air-pressure has the potential of resulting
in higher levels of vibration.
Do not grab, hold or touch the inserted tool

when using the machine.
Participate in health surveillance or monitoring,

medical exams, and training programs offered
by your employer and when required by law.
Note! See the "Noise & vibration declaration
statement" for the machine, including the
declared vibration values and "Additional
vibration information". These can be found
at the end of the Safety and Operating
instructions.
machine modification
hazard
Warning
Any machine modification not approved by
Chicago Pneumatic may result in serious injuries to
yourself or others.
The machine must not be modified

without Chicago Pneumatic's permission.
use only original parts and accessories

approved by Chicago Pneumatic.
9800 0606 90
Safety and Operating instructions
additional safety
instructions
Machines and accessories must only be used for

their intended purpose.
Only qualified and trained persons may operate

or maintain the machine.
Learn how the machine is switched off in the

event of an emergency.
The maximum permissible air pressure for the

machine must not be exceeded.
Release the start and stop device immediately in

all cases of power supply interruption.
Always inspect the equipment prior to use. Do

not use the equipment if you suspect that it is
damaged.
Always use your common sense and good

judgment.
Pay attention and look at what you are doing.

Do not use the machine when you are tired

or under the influence of drugs, alcohol or
anything else that may affect your vision,
reactions or judgment.
Participate in safety and training courses.

Never strike or abuse any equipment.

Keep the machine and tools in a safe place, out

of the reach of children and locked up.
Make sure that all the attached and related

equipment is properly maintained.
Signs and stickers bearing important

information regarding personal safety and
care of the machine are supplied with every
machine. Make sure that the signs are always
legible. New signs and stickers can be ordered
from the spare parts list.
Make sure that no unauthorized personnel

trespass into the working zone.
Keep the workplace clean and free from foreign

objects.
Never point a compressed air hose at yourself or

anyone else. To avoid the risk of getting injured,
never use compressed air to blow e.g. dust, dirt
etc. from your clothes.
9