Safety Instructions; Safety Symbols Used; Machine And Tool Operating Hazards - Chicago Pneumatic CP 4123 Serie Sicherheitsvorschriften Und Bedienungsanleitung

Safety and Operating instructions

SaFETY iNSTruCTiONS

To reduce the risk of serious injury or death to
yourself or others, read these safety instructions
before operating the machine.
Post these safety instructions at work locations,
provide copies to employees, and make sure that
everyone reads the safety instructions before
operating or servicing the machine.
Comply with all safety regulations.

Safety symbols used

The indications Danger, Warning and Caution
have the following meanings:
Danger
Warning
Caution
machine and tool
operating hazards
Warning
Sudden or unexpected movement of the machine
may occur during operation, which may cause
injuries. Furthermore, losing your balance or
slipping may cause injury. To reduce risks:
Make sure that you always keep a stable

position with your feet as far apart as your
shoulder width, and keeping a balanced body
weight.
Stand firmly and always hold on to the machine

with both hands.
Do not start the machine when it is lying on the

ground.
Make sure that the handle is clean and free of

grease and oil.
6
indicates an imminently
hazardous situation which,
if not avoided, will result
in death or serious injury.
indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.
indicates a potentially
hazardous situation which,
if not avoided, may result
in minor or moderate
injury.
Warning
Unintended start of the machine may cause injury.
Keep your hands away from the start and stop

device until you are about to start work.
Warning
The inserted tool is exposed to heavy strains
when the machine is used and after a certain
amount of use the tool may break due to fatigue.
If the tool breaks, there may be sudden or strong
movements. Such sudden or strong movements
may cause serious injury.
Make sure that you always keep a stable

position with your feet as far apart as your
shoulder width, and keeping a balanced body
weight.
Keep your hands and feet away from the

inserted tool.
Check regularly for wear to the inserted tool,

and check whether there are any signs of
damage or visible cracks.
Warning
An incorrect dimension of the inserted tool's shank
can result in the inserted tool being lost or slipping
out during operation. An inserted tool that is lost
or slips out can cause personal injury.
Before inserting the work tool, make sure that

the shank's dimensions are the ones that should
be used in the machine.
Inserted tools without a collar may not be used.

Warning
If the cap is not fitted, the inserted tool can be
ejected with force, which can cause personal
injury.
Once the inserted tool has been mounted and

the cap fitted, the locking function must be
checked by pulling the inserted tool outwards
sharply.
Make sure that the inserted tool is fully inserted

and the cap tightened to its end position and
locked by the O-ring before the machine is
started.
Never point the inserted tool at yourself or

anyone else.
CP 4123, CP 4125
9800 0606 90