Noise & Vibration Declaration Statement; Additional Vibration Information; Noise And Vibration Data - Chicago Pneumatic CP 4123 Serie Sicherheitsvorschriften Und Bedienungsanleitung

Safety and Operating instructions
Noise & vibration declaration statement
a
Vibration value and uncertainty
vibration data" for values A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive
or standards and are suitable for comparison with the declared values of other tools tested in accordance
with the same directive or standards. These declared values are not adequate for use in risk assessments
and values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material
the machine is used, as well as upon the exposure time and the physical condition of the user, and the
condition of the machine.
We, Chicago Pneumatic, cannot be held liable for the consequences of using the declared values, instead of
values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.

additional vibration information

This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
This additional vibration information may be of assistance to employers in meeting their obligations (for
example under EU Directive 2002/44/EC) to assess the risks to their workers arising from hand arm vibration
associated with the use of this tool.
The vibration emission varies greatly with task and operator technique. The declared vibration value relates
to a single axis on the D-handle and much higher vibration levels may occur at other hand positions or
measurement directions.
We recommend a programme of health surveillance to detect early symptoms that may relate to vibration
exposure, so that management procedures can be modified to help prevent significant disability.

Noise and vibration data

CP 4123
CP 4125
18
B
in accordance with EN ISO 8662-5. Please see table "Noise and
Vibration values
Single axis values
Declared
ISO 8662-5
A
m/s
2
value
13
13
CP 4123, CP 4125
B
m/s
2
spreads
6
6
9800 0606 90