Vexve AM20-W Betriebsanleitung Seite 24

Room unit display symbols
24
Shown when the room unit is sending or receiving data.
Indicates day programme.
Indicates night programme.
Indicates that a week programme is on.
Indicates the motor/valve turning direction during installation
(valve for right- or left-handed use).
Shown when the supply water temperature limits are being set.
Function as auxiliary symbols, such as OK;
the function durations are shown with these symbols.
Shown when 1/3 battery life is remaining. When this symbol is dis-
played, replace the AA alkaline batteries in the room unit.
Indicates a measured temperature;
reading from the indoor sensor or the supply water sensor in centi-
grade.
The floor heating symbol is shown
whenever floor heating is selected, i.e.
the device is in LO mode.
The radiator heating symbol is shown
whenever radiator heating is selected,
i.e. the device is in HI mode.
The desired temperature is shown to 0.5 degree accuracy.
Indicates the range of the radio connection in the installation menu.
User menu symbol.
Installation menu symbol.
To activate the ECO function, press button B once (see page 2).
To activate the holiday temperature lowering function, press button B
for more than 3 seconds (see page 8)
The heat symbol (three wavy
lines) is shown when heating
is required. In summer, the
heat symbol is not shown
when the controller has
closed the shunt.
www.vexve.fi.