Vexve AM20-W Betriebsanleitung Seite 20

Room unit operating switches
Page 2, Figure 1
A. Rotary switch
For adjusting the temperature and selecting
menu functions
B. Eco button
· One push:
factory setting, 8 h / 20.0 ºC
· A long push (over 3 seconds):
factory setting 30 days / 18.5 ºC
· When the device is in ECO mode, you can
return to the standard programme by pressing
the button once.
Room unit basic settings during installation
20
AFTER BATTERY INSTALLATION
'RU' shows on the room unit display.
When button C is pressed, the device automatically begins creating an RF con-
nection between the room unit and motor unit.
WHEN THE UNITS HAVE BEEN PAIRED, the message 'PAIR OK' appears on
the display. To continue, press button C. The device begins the Start Up Wizard
function (see the next page).
If a connection could not be formed, the message 'PAIR FAIL' appears on the
display. If this happens, disconnect the transformer from
the motor unit for a moment and press button C twice to begin a new search.
C. Enter button
· One push: accept selection
· A long push (over 3 seconds):
go to user menu
D. Commissioning button
· One push: go to user menu
www.vexve.fi.