Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Transformer
· fits a standard socket; connected to connec-
tor A in the motor unit (see below for when to
switch on power)
Antenna unit
Page 2, Figure 2
· with a 1.5-metre wire with RJ connectors
· to be connected to connector C in the motor
unit
· can be mounted on a wall with the supplied
screws
· to ensure good communication, the RF trans-
mitter should be placed as high as possible
· equipped with a two-coloured LED (green/red)
that indicates radio communications
Room unit
Page 2, Figure 1
· operates with three AA batteries (supplied with
the batteries installed)
· illuminated LCD display and a rotary switch for
the selection of the desired indoor temperature
and for navigation in the menus
· ECO button on the left for easy temperature
reduction, e.g. during the workday or over
holiday periods
· menu button on the right, for programming
weekly schedules, checking supply water and
measured indoor temperatures, and setting
supply water temperatures (min/max)
· commissioning button D embedded in the back
plate (can be pressed with the tip of a pen); ac-
cess to installation menus where you can select
the heating method and valve rotation direction,
and reset all settings
· the battery compartment cover also functions
as a wall bracket (mounting screws supplied)
17
Werbung
Inhaltsverzeichnis
