Measure Air-Pressure - ULTIMATE SPEED KH 4256 Originalbetriebsanleitung

Handling and operation
♦ Check the increasing air pressure on the air pressure indicator
as the desired infl ation level has been reached, switch the appliance off
(function switch
♦ Open the closing lever of the connection valve
nection valve (complete with the adapter valve bonnet
used) from the valve of the infl ated article.

Measure air-pressure

NOTICE
► The appliance does not need a power supply to measure the air pressure
of an infl ated object.
♦ Check to see if a valve adaptor attachment
infl ated object.
Should this be the case: Press the appropriate adapter valve bonnet
into the opening of the connection valve
down.
♦ If you do not have to use an adapter valve bonnet
closure of the connecting valve
must point to the rear.
♦ Place the opened connection valve
infl ated and then press it down so that it is seated fi rmly.
♦ Close the connection valve
Ensure that the connection valve cannot loosen itself.
♦ Read off the air pressure on the air pressure indicator
♦ Open the closing lever of the connection valve
nection valve (complete with the adapter valve bonnet
used) from the valve of the air-fi lled article.
KH 4256
in the position "0").
2
is open. When open, the closing lever
5
on the valve of the object to be
5
, in that you push the closing lever down.
5
3
and then pull the con-
5
7 , if one has been
7 is required for use on the
and then push the closing lever
5
7 , ensure that the
3 of the appliance.
and then pull the con-
5
7 , if one has been
. As soon
GB
MT
7
51