How Can I Locate An Access Point - Fluke Networks AirCheck Erste Schritte

AirCheck Getting Started Guide
You can also set a series of APs to authorized or
unauthorized based on the AP BSSID/MAC or a
Vendor MAC prefix by selecting
to Authorized or
Unauthorized. These options may save you
configuration time and provide quick visibility into
potential issues. For example, if a specific vendor's
equipment is not allowed per your network policy,
use the vendor MAC prefix to set the ACL to
unauthorized. When those access points are
detected, they will automatically be reported as
unauthorized.
When you save your profile, the assigned ACLs
will also be saved as part of that profile.
AutoTest optionally includes a Rogue Access Point
Test which detects and reports rogue access points.
To enable this functionality, go to Tools >
Thresholds/AutoTest Settings > Rogue Access
Point AutoTest. For accurate and meaningful test
results, you must configure access point ACLs prior
to running AutoTest.

How Can I Locate an Access Point?

Select Access Points, select one access point, then

press Locate on the Access Point Details screen.
You may also use the optional Fluke Networks external
directional antenna to help you find access points
faster.
22
Set AP series to
Note
Set AP series