Fluke Networks AirCheck Erste Schritte Seite 33

Discover Channels, Networks, APs, or Clients
Red bars: The tester received a country code
that is different from the setting in Tools > Set
country. To identify the network or access point
that transmits the code, select Networks or Access
Points, then look for the red bars in the 802.11
column.
bonded channel. Access points that use the 802.11n
standard can bond a channel with an extension
channel above (
one 40 MHz channel. This wider channel gives the
network higher throughput.
(...): All access points in the network do not use the
same 802.11 standard.

Notes: Press
adds notes automatically. Networks that have notes
are shown in purple.
(...): The network has multiple notes. To see all the
notes, highlight the network, then press
to go to the Access Point Details screen.

sequences.
sequences.
: One or more access points use a

to scroll to the notes field. The tester
: Sort 1, descending and ascending
: Sort 2, descending and ascending
) or below it ( ) to make
L
twice
27