Basic connection
• It is recommended to connect a multi-
system TV.
• Ensure that this player and other
equipment to be connected are set to the
standby mode or off and disconnect the
AC power cords before commencing
connection.
• Do not block ventilation holes of any of
the equipment and arrange them so that
air can circulate freely.
• Read through the instructions before
connecting other equipment.
• Ensure that you observe the color coding
when connecting audio and video cables.
Note:
• During DVD play, the TV volume may be
at a lower level than during TV
broadcasts, etc. If this is the case, adjust
the volume to the desired level.
•
If the DVD/VCD/CD player is connected
to the TV through a video cassette
recorder, the picture may not be played
back normally with some DVDs. If this is
the case, do not connect the player via
the VCR.
49