Specifications - Makita HR4003C Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Switch trigger
2-1. Switch button
3-1. Adjusting dial
4-1. Change lever
4-2. Pointer
5-1. Change lever
5-2. Pointer
6-1. Change lever
6-2. Pointer
7-1. Switch button
8-1. Power-ON indicator lamp (green)
8-2. Service indicator lamp (red)
10-1. Side handle
10-2. Clamp nut

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for hammer drilling in brick,
concrete and stone as well as for chiselling work.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model HR4003C, HR4013C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model HR5202C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Explanation of general view
11-1. Side grip
12-1. Bit shank
12-2. Bit grease
13-1. Bit
13-2. Release cover
14-1. Bit
14-2. Release cover
15-1. Change lever
15-2. Pointer
16-1. Change lever
16-2. Pointer
17-1. Depth gauge
17-2. Lock button
20-1. Blow-out bulb
Model
Carbide-tipped bit
Core bit
-1
)
Overall length
Net weight
Safety class
noise level determined
) : 92 dB (A)
pA
) : 103 dB (A)
WA
) : 99 dB (A)
pA
) : 110 dB (A)
WA
HR4003C
40 mm
105 mm
250 - 500
1,450 - 2,900
479 mm
6.2 kg
ENE044-1
Model HR5212C
Sound pressure level (L
Sound power level (L
ENF002-2
Uncertainty (K) : 3 dB (A)
Vibration
The vibration
ENG905-1
determined according to EN60745:
Model HR4003C
Work mode : chiselling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
4
22-1. Screws
23-1. Screws
24-1. Guard cover
25-1. Connector
26-1. Change lever
26-2. Screw
26-3. Crank cap cover
27-1. Control plate
28-1. Screws
28-2. Crank cap
29-1. Hammer grease
30-1. Connector
HR4013C HR5202C
150 - 310
1,100 - 2,250
6.8 kg 10.9 kg
/II
) : 98 dB (A)
pA
) : 109 dB (A)
WA
Wear ear protection
total value (tri-axial
) : 9.0 m/s
h,CHeq
2
) : 9.0 m/s
h,CHeq
2
) : 10.0 m/s
h,HD
2
HR5212C
52 mm
160 mm
599 mm
11.9 kg
ENG900-1
vector sum)
2
2
2