Using The Cooling Device; Cleaning And Maintenance - Dometic ECOLINE RH430LD Montage- Und Bedienungsanleitung

Cleaning and maintenance

7.2

Using the cooling device

A
NOTICE! Risk of damage
•
Ensure that the objects placed in the cooling device are suitable for
cooling to the selected temperature.
•
Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy the glass containers.
•
Ensure that your cooling device is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
I
NOTE
If the cooling device is not in use for an extended period of time, leave
the door slightly ajar to prevent unpleasant odours building up.
➤ Place the cooling device on a firm base.
➤ Connect the connection cable to the AC mains supply.
✓ The cooling device starts cooling the interior.
➤ Set the temperature controller (fig. 1 1, page 3) to the desired temperature
(3 – 12 °C).
➤ If you wish to switch the cooling device off, pull out the connection cable
or ...
➤ Rotate the temperature controller (fig. 1 1, page 3) anti-clockwise to the OFF
position.
8 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Risk of damage
•
Never clean the cooling device under running water or in dish water.
•
Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooling device.
18
RH4xxLD, RH4xxLG
EN