Control Panel Notifications; Manual Operation - Olimpia splendid UNICO TWIN MASTER Hinweise Für Die Verwendung Und Pflege

6.2.1 -

CONTROL PANEL NOTIFICATIONS

The console includes the notifications listed below.
OPERATING CONDITIONS
Stand-by (timer disabled)
Cooling mode
Heating mode
Dehumidifying mode
fan only mode
automatic mode
timer enabled
Self-diagnostics function enabled
Win contact opening
maximum ventilation speed
minimum ventilation speed
low ventilation speed
automatic ventilation speed
6.2.2 -

MANUAL OPERATION

manual operation can be used temporarily if the remote control cannot be found or its batteries are discharged.
a. Open and lift the front panel to an angle in which it blocks and a "click" is heard (figure 40).
b. Press the control key once (AUTO/OFF) to start operation in "AUTO" mode (figure 41).
c. Close the panel well, taking it back to its original position (figure 42).
• By pressing the manual key, the operating passes in sequence to:
AUTO > COOL > OFF.
• To restore remote control operation, use the remote control directly.
EN - 34
DISPLAY
off
18÷30°C (64÷86°f) on (blue)
16÷30°C (61÷86°f) on (red)
- - on (blue)
- -
x
LED5 LED1
off off
x
x
x
off x
x x
x on
off off
off x
x x
x x
x x
x x