Herunterladen Inhalt Inhalt Diese Seite drucken

Anomalies And Remedies; Maintenance And Cleaning - Olimpia splendid UNICO TWIN MASTER Hinweise Für Die Verwendung Und Pflege

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

6.6.4 -

ANOMALIES AND REMEDIES

Malfunctioning
The unit will not start.
The appliance doesn't cool/heat
sufficiently anymore.
if the problem has not been solved, please contact the nearest technical assistance service.
Please give detailed information about the malfunction and on the equipment version.

7 - MAINTENANCE AND CLEANING

Before proceeding with any maintenance and cleaning,
always make sure the system has been switched off, using
the remote control, and the power supply plug has been
disconnected from the system socket (or the upstream
master isolating switch is positioned at "0" OFF).
Do not touch the metal parts of the unit when removing the air filters.
They are very sharp. Cuts or injury risk.
Cause
Current failure
the unit is disconnected from the
current.
the thermal-magnetic circuit breaker
has intervened.
the remote control batteries may be
discharged.
the time set with the timer may not
be correct.
incorrect temperature setting.
The air filter is dirty.
the doors or windows are open.
the air inlet or outlet vents of the
indoor or outdoor units are blocked.
the thermo refrigerating load has
increased (for instance, a door or a
window have been left open, other-
wise the air conditioner is installed in
an environment with an equipment
which dissipates a strong quantity
of heat);
Both internal units are operational;
the thermal load is higher than the
power of each internal unit.
What must be done?
Wait for the current to be restored.
Check that the plug is inserted in the
wall socket.
restore the thermal-magnetic circuit
breaker.
replace the batteries.
Wait or annul the timer setting.
Set the temperature correctly. Consul
the "Using the remote control" chapter
for the procedure.
Clean the air filter.
Close the doors or windows.
first, remove the obstructions and
then re-start the unit.
Close the door or the window.
Change environment of installation.
Switch off one of the two internal units.
UNICO TWIN
EN - 43

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Unico twin wall

Inhaltsverzeichnis