Resetting All Remote Control Functions; Description Of The Air Conditioner Functions; Turning The Unit On/Off; Operation In "Spa" Mode Only (Automatic) - Olimpia splendid UNICO TWIN MASTER Hinweise Für Die Verwendung Und Pflege

5.3.5 -

RESETTING ALL REMOTE CONTROL FUNCTIONS

Press the button T10 to reset all the remote control settings.
By doing so all of the settings of the timer are cancelled and the remote control restores all of the default
settings.
furthermore, by pressing button T10, all of the symbols indicated in fig. "E" will appear on the display, thus
making it possible to check the integrity of the display itself.

5.4 - DESCRIPTION OF THE AIR CONDITIONER FUNCTIONS

• The machine is equipped with a power switch (10); the switch (10) must be positioned to "I" (fig. 39) in
order to work.
Press the switch in position "I" to start the appliance.
• Once these operations have been carried out, the machine may be regulated using the remote control.
in order to transmit commands to the indoor appliance, point the front of the remote control toward the
appliance's control panel.
the device emits a beep when it receives a command.
• The maximum distance from which the appliance can be controlled is about 8 meters (with charged bat-
teries).
5.4.1 -

TURNING THE UNIT ON/OFF

• Press key T1 on the remote control to activate or deactivate (stand-by) the air conditioner.
the control system of the unit is equipped with memory, for this reason all the settings won't be lost when
shutting off the appliance itself.
In case of prolonged stop of the machine, it must be deactivated turning the main
switch off or unplugging the machine from the mains.
5.4.2 -

OPERATION IN "SPA" MODE ONLY (AUTOMATIC)

• In this mode, the appliance automatically sets the mode of operation (cooling, ventilation or heating, if
applicable), the system temperature and ventilation speed.
• Press key T2 on the remote control to activate this mode.
5.4.3 -

OPERATION IN "COOLING" MODE ONLY

• When used in this mode, the air conditioner dehumidifies and cools the room.
• To activate this mode, press several times the key T4 on the remote control until when the symbol U3
appears on its display.
• In this run mode, the required temperature and fan speed can be set.
after three minutes (maximum time) from the activation of this mode of operation, the appliance starts
supplying cold air.
The activation of the compressor is indicated by the illumination of the corresponding LED B (fig. C)
located on the console.
5.4.4 -

OPERATION IN "DEHUMIDIFICATION" MODE ONLY

• When used in this mode, the air conditioner eliminates the humidity in the room.
this function can be extremely useful between seasons, particularly on rainy days when the temperature
is not uncomfortable but the excess humidity feels unpleasant.
EN - 26