Vertical Setup - GeoMax ZEL400H+ Bedienungsanleitung

Basic Operation ZEL400H+ | 8

2.2 Vertical Setup

The ZEL400H+ is equipped with semi-automatic levelling.
This means that you can put the ZEL400H+ roughly in vertical position but
there is the need to level it accurately with the use of the keypad on the laser
or the ZDR300 laser receiver / remote control.
2.2.1 How to Use the Semi-Automatic Levelling
Put the ZEL400H+ in vertical position by using the retractable feet on the laser
or with use of a mount.
Find the levelling indication leds near the Handle. You will notice that at least
one of the leds will start blinking.