Technical Features; Construction; Technical Data - VWR STAR-BEATER Bedienungsanleitung

INSTRUCTION MANUAL

4. TECHNICAL FEATURES

4.1. CONSTRUCTION

The housing of Star-Beater is made of steel plate varnished with high resistant
polyurethane lacquer.
Protective equipment
The milling chamber of the Star-Beater is enclosed by a strong covering hood.
Starting of the machine is possible only with the hood closed. If the hood is open, message
"LId" appears on display, when you press the START/STOP key.
When message "LId" appears on display, you have to close the hood and clear the
message by pressing the START/STOP key. Then you can start the machine by pressing
the START/STOP key again.
If you open the hood during the operation, the machine stops rapidly and message "Er3"
appears on display.
When message "Er3" appears on display, you can't start the machine again by pressing
the START/STOP key. You have to turn the main POWER switch OFF and then ON again,
to clear the message and use the machine again.

4.2. TECHNICAL DATA

Power supply
Rated power
Fuses
Vibrational frequency
regulation
Timer
Max. volume of milling jars
Dimensions W x D x H
Weight
Noise emission
(without milling balls)
Ambient temperature
Atmospheric humidity
230V ± 10% - 50/60Hz
200W
2 x T2A 250V
Digital, from 3 to 30 Hz (180 - 1800 min
in 0.1 Hz steps
5 sec - 99 min, timer HOLD function,
in 1 sec steps (below 10 min),
or 10 sec steps (above 10 min)
2 x 50 ml
385 x 420 x 240 mm (465 mm with hood open)
42 kg
70 dB(A)
5°C - 40°C
< 85% RH
EN 7
VWR Star-Beater
-1
),