Setting The Floor Tool; Overview Of The Floor Nozzle Settings; Vacuuming With Accessory; Stopping And Parking The Appli- Ance - Bosch BGB8 Gebrauchsanleitung

en Cleaning and servicing

Setting the floor tool

Use the switch to set the floor
▶
nozzle to the required base.
→ Fig.
12
Overview of the floor nozzle
settings
Here, you can find an overview of the
floor nozzle settings.
Symbol Use
Vacuum rugs and carpets.
Vaccum parquet and hard floors.

Vacuuming with accessory

Place the required nozzle onto the
1.
telescopic tube or the handle.
After use, take the nozzle that is
2.
used from the telescopic tube or
remove from the handle.
Stopping and parking the ap-
pliance
Switch off the appliance.
1.
If you want to stop vacuuming for
2.
longer use periods, use the stor-
age aid on the underside of the
appliance.
→ Fig. 10
Use the parking aid for shorter
3.
programme pauses.
→ Fig.
13

Dismantling the appliance

Disconnect the connection
1.
between the telescopic tube and
the handle.
→ Fig.
14
Push the two locking catches to-
2.
gether.
Pull the tube out of the appliance.
3.
→ Fig. 15
32

Cleaning and servicing

Cle a ning a nd s e rv ic ing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.

Motor protection

Pay attention to dirt in the motor.
ATTENTION!
Dirt in the motor may damage the
motor.
▶
Never operate the appliance
without a dust bag.
▶
Never operate the appliance
without the motor protection filter.
▶
Never operate the appliance
without the exhaust filter.

Cleaning products

Only use suitable cleaning products.
ATTENTION!
Using unsuitable cleaning products
or incorrect cleaning may damage
the appliance.
▶
Do not use harsh or abrasive de-
tergents.
▶
Do not use cleaning products with
a high alcohol content.
▶
Do not use hard scouring pads or
cleaning sponges.
▶
Wash sponge cloths thoroughly
before use.
Cleaning the motor protection
filter
Tip: To achieve the best possible va-
cuuming results, tap out or wash the
motor protection filter at regular inter-
vals. After vacuuming fine dust
particles, clean or replace the motor
protection filter in order to guarantee
the appliance's suction.
Switch off the appliance.
1.