Herunterladen Inhalt Inhalt Diese Seite drucken

Controlling The Power; Setting The Floor Tool; Parking The Appliance; Stopping And Carrying The Appli- Ance - Bosch BGL6 Gebrauchsanleitung

Bagged vacuum cleaner
Vorschau ausblenden Andere Handbücher für BGL6:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en Basic operation
Briefly pull on the mains power
3.
supply cord and then let go.
a The power cord retracts automatic-
ally.

Controlling the power

You can control the setting continu-
ously.
Turn the power control to the re-
1.
quired setting.
→ Fig.
10
Turn the telescopic tube with air
2.
flow regulator to the required posi-
tion.
→ Fig.
11
a The power is controlled continu-
ously.

Setting the floor tool

Use the switch to set the floor
nozzle to the required base.
→ Fig.
12

Parking the appliance

Tip: When taking shorter breaks from
vacuuming, the floor nozzle can be
placed in the parking aid.
Slide the hook on the floor nozzle
into the parking aid.
→ Fig.
13
Stopping and carrying the ap-
pliance
Switch off the appliance.
1.
→ "Switching off the appliance",
Page 31
Stand the appliance upright on its
2.
end.
Slide the hook on the floor tool into
3.
the parking aid.
→ Fig.
14
1
Depending on the appliance specifications
32
4.

Vacuuming with accessory

1
1.
2.
Vacuuming with the Multi-
Use-Brush
Note: Do not remove the Multi-Use-
Brush after use. The suction power is
not restricted by the fitted Multi-Use-
Brush.
ATTENTION!
Vacuuming without the bristle ring
pushed down can damage the sur-
face.
1.
2.
3.
a The Multi-Use-Brush is ready to
4.
5.
6.
7.
To overcome obstacles, carry the
appliance by the handle.
Place the required nozzle onto the
telescopic tube or the handle.
After use, take the nozzle that is
used from the telescopic tube or
remove from the handle.
1
Never vacuum with the bristle ring
pushed up.
Push the Multi-Use-Brush onto the
handle or the tube and lock it in
place.
→ Fig.
15
Press the two locking catches on
the bristle ring.
Push the bristle ring down and
lock it in place.
→ Fig.
16
use.
Vacuum using the Multi-Use-Brush.
Press the two locking catches on
the bristle ring.
Push the bristle ring upwards and
lock it in place.
→ Fig.
16
Push the floor tool or the tube onto
the Multi-Use-Brush.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bgb6

Inhaltsverzeichnis