Siemens SITRANS LR200 Kurzanleitung Seite 15

Fault present indicators
When a fault is present the fault code and an error message are
S: 0 LOE
displayed in the text area (7), and a service-required icon appears in the
device status location (8)
Navigation view
• A visible menu bar indicates the
menu list is too long to display all
items.
• A band halfway down the menu
bar indicates the current item is
halfway down the list.
• The depth and relative position of
the item band on the menu bar indicates the length of the menu list, and approximate
position of the current item in the list.
• A deeper band indicates fewer items.
Parameter view
parameter
name
Handheld Programmer (Part No. 7ML1930-1BK)
Ordered separately.
C
1)
New value is displayed in LCD secondary region.
2)
Opens the menu level last displayed in this power cycle, unless power has been cycled since exiting
PROGRAM mode or more than 10 minutes have elapsed since PROGRAM mode was used. Then top
level menu will be displayed.
3)
Opens the top level menu
A5E31993614
current
menu
menu
bar
item
band
parameter
number
parameter
value/
selection
1) 2) 3)
Key Function in Measurement mode
Updates the loop current
Updates internal enclosure temperature reading
Updates echo confidence value
Updates distance measurement
Mode opens PROGRAM mode
RIGHT arrow opens PROGRAM mode
UP or DOWN arrow toggles between linear units and %
SITRANS LR200 (HART) – QUICK START MANUAL
Edit view
1)
.
1)
.
1)
.
2)
.
3)
.
current
item
number
current
item
1)
.
Page EN-13