Herunterladen Inhalt Inhalt Diese Seite drucken

SUHNER UEK 10 -R Originalbetriebsanleitung Seite 28

Inhaltsverzeichnis

Werbung

schine kann beeinträchtigt
werden. Es empfiehlt sich in
solchen Fällen die Verwen-
dung einer stationären Ab-
sauganlage, häufiges Aus-
blasen der Lüftungsschlitze
und das Vorschalten eines
Fehlerstrom-Schutzschalter
(FI).
4.1.1 Kohlebürstenwechsel
Der
Automatic-Stop
die Maschine vor einem Defekt
durch zu stark verbrauchte Koh-
lebürsten.
Die Maschine ist mit zwei Koh-
lebürsten ausgerüstet, d.h. es
befindet sich eine in jeder Griff-
hälfte.
Die Kohlebürsten müssen wie
folgt gewechselt werden:
Vier Schrauben lösen und Handgriff-
hälfte entfernen.
28
DE
protection de la machine
peut en être altérée. Il est
recommandé dans de tels
cas de faire usage d'une
installation d'aspiration
stationnaire, de souffler les
ouïes de ventilation et d'utili-
ser un interrupteur à courant
de défaut (FI) en amont.
4.1.1 Changement des char-
bons du collecteur
schützt
Un arrêt automatique protège
la machine d'une défectuosité
lorsque les balais du collecteur
sont trop usés.
La machine est équipée de
deux balais que l'on trouve dans
chacune des demi-poignées.
Les balais doivent être échan-
gés comme suit :
Desserrer quatre vis et enlever la
demi-coque de poignée.
FR
insulation of the machine.
In such cases the use of
a stationary vacuuming
system, frequent blowing
out of the ventilation slots
and protection by a fault
current protection switch are
advised.
4.1.1 Changing the carbon
brushes
The Automatic-Stop feature pro-
tects the machine from defects
due to excessively consumed
carbon brushes.
The machine is equipped with
two carbon brushes, i.e. one is
installed in each handle half.
The carbon brushes must be
changed as follows:
Unscrew four screws and remove the
handle halves.
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Uek 10-r

Inhaltsverzeichnis