Installing The Stage Insert; Installing The Eyepieces; Installing Condenser And Led Housing - Optika Italy IM Serie Bedienungsanleitung

7.4.3 Installing the stage insert

1. When using the glass stage, make sure that the
insert is horizontal.
2. Install the stage insert in the stage opening. (Fig.
5)

7.4.4 Installing the eyepieces

nsert both eyepieces into the tubes of the optical
I
head. (Fig. 6)

7.4.5 Installing condenser and LED housing

1. Insert the condenser illumination unit into the bra-
cket. (Fig. 7)
2. Turn the condenser illumination unit clockwise
about 90°, with the "AS" mark of filter holder fa-
cing front. Align the screw of the condenser il-
lumination unit and the hole of the holder, then
screw the bolt in the hole with the supplied allen
wrench. (Fig. 8)
3. Insert the connector plug into the connector jack.
Page 11
Fig. 5
Fig. 6
Fig. 7
Fig. 8