Abilica xc classic 2000 SKI 2000Y Montageanleitung Seite 15

STEP 13
Hold the assembly up against a solid wall.
Make 4 positioning marks on the solid wall according to the positions from Upper Wall Mounting
Bracket (9) and Lower Wall Mounting Bracket (8).
Drill 4 holes based on the positioning marks.
STEP 14
Attach and tighten the assembly to the solid wall using: 4 PCs of ST8x50mm Socket Head Cap
Screw (54) and Flat Washer Φ22xΦ9x2.0mm (55).
NOTE: Fully tighten bolts at end of this step.
#88 Wrench 13-15
#54 M8X50mm 4PCS
#55 Large M8 4PCS
55
54
54
8
55
55
54
54
15
9
55
D