Abilica xc classic 2000 SKI 2000Y Montageanleitung Seite 12

STEP 5
Make the assembly stand up. Tighten the Left and Right Upper Arms (2/3) using: 2 PCs of
M8x12mm Socket Head Cap Screw (86) and M8 Flat Washer (71). Then tighten all bolts.
NOTE: Fully tighten bolts at end of this step.
STEP 6
Remove the clicker from the Drive Cord (52).
#89 Allen Wrench 6mm
#86 M8X12mm 2PCS
#71 M8 2PCS
12