Operating The Blower; Holding And Controlling The Blower; Selecting Power Level; Activating The Boost Function - Stihl BGA 100 Gebrauchsanleitung

English
► If air continues to flow from nozzle: Pull connecting cable
plug out of the socket and contact your STIHL dealer for
assistance.
Blower has a malfunction.

11 Operating the Blower

11.1 Holding and Controlling the Blower

1
2
► If you use the STIHL AR battery or the carrying system
with hip padding: Connect the carrying ring (2) to the
carabiner (1).
► Hold and control the blower with one hand on the control
handle - wrap your thumb around the handle.
36

11.2 Selecting Power Level

One of three power levels can be selected to suit the
application. The LEDs indicate the selected power level. The
higher the power lever, the higher the volume of air that
flows from the nozzle.
The selected power level affects the battery's runtime. The
lower the power level, the longer the runtime.
1
► Push the retaining latch (1) with your thumb to position
The LEDs indicate the selected power level.
► Push the retaining latch (1) forwards and allow it to spring
back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3, etc.
► Push the retaining latch (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.

11.3 Activating the Boost Function

The boost function can be activated independent of the
selected power level. The blower operates at maximum
power when the boost function is activated.
The boost function affects the battery's runtime. The longer
the boost function is activated, the shorter the battery
runtime.
11 Operating the Blower
.
0458-711-9821-B